Sintesis Cu(II)-Imprinted Polymers untuk Ekstraksi Fasa Padat dan Prakonsentrasi Ion Cu(II) dengan Ligan Pengkhelat 4-(2-Pyridylazo)resorcinol
DOI:
https://doi.org/10.15575/ak.v2i1.350Keywords:
Cu(II)-Imprinted Polymers, 4-(2-pyridylazo) recorcinol, ekstraksi fasa padat, prakonsentrasiAbstract
ABSTRAK
Kontaminasi logam berat pada lingkungan perairan merupakan masalah besar dunia saat ini. Logam berat tidak dapat diurai atau dimusnahkan dan merupakan zat pencemar kimiawi. Cu(II) adalah logam berat yang bersifat racun jika masuk kedalam tubuh. Metode analisis Cu(II) sudah banyak dikembangkan salah satunya dengan teknik injeksi alir. Metode analisis ini memiliki waktu analisis yang singkat namun menggunakan pelarut yang mahal, faktor prakonsentrasi yang rendah, dan memiliki selektivitas yang rendah pula untuk ion Cu(II). Oleh karena itu, untuk meningkatkan selektivitas dilakukan pengembangan metode ekstraksi fasa padat menggunakan polimer pengkelat yaitu Ion Imprinted polymer (IIPs). Pada penelitian ini, Cu-IP berhasil disintesis melalui polimerisasi thermal menggunakan asam salisilat dan formaldehida dengan ligan pengkelat 4-(2-pyridylazo)recorcinol dengan pemanasan selama 10 jam pada temperatur 500C , menggunakan HCl sebagai katalis. Perbandingan stoikiometri kompleks biner Cu(II):PAR dibuat dengan perbandingan mol 1:1 yang dihitung dengan metode job. Kapasitas adsorpsi maksimum teramati pada konsentrasi 10 ppm dengan pH 6 dan waktu kontak 80 menit. IIP digunakan untuk prakonsentrasi adsorpsi dan desorpsi dengan persen perolehan kembali sebesar 97,09 % untuk IIP dan 53,11 % untuk NIP. Faktor prakonsentrasi yang diperoleh pada sampel lingkungan sebesar 1,85. Dengan hasil percobaan tersebut Cu-IP terbukti sebagai polymer fungsional dengan selektivitas dan regenerasi tinggi.
References
Saepudin Suwarsa, dkk, (2008) pengembangan metode Prakonsentrasi dengan teknik Injeksi alir untuk analisis Cu dan Pb dalam aliran sungai waduk saguling. Jurnal penelitian universitas mulawarman, samarinda.
Kawamura, S. 1991. Integrated Design of Water Treatment Facilities. New York: John Willey an Sons, Inc.
Lee, J.D., 1994, Concise Inorganic Chemistry, Fourth edition, Chapman and Hall,London
Jadid, A.P et,al. (2008), Preconcentration of cooper with solid phase extraction and its determination by flame Atomin Absorption Spestrometry, E-journal of chemistry, 5, 878-883
Ghaedi, Mehrorang. et,al. (2009) Determination of Cu, Fe, Pb, and Zn by flame –AAS after preconcentration using sodium Deodecyl sulfate Coated alumina modified with complexing agent, Journal Of the Chinese chemical Society, 2009, 56. 150-15
Lastri Herlina (2012), Ion imprinted polymers (IIPs) untuk ekstraksi fasa padat dan prakonsentrasi ion timbal(II), Tugas Akhir program SI, Universitas Islam Negeri Sunan Gunung Djati Bandung.
D.K Singh, Shraddha Mishra (2009), Shyntesis of a new acu(II)-ion imprinted polymers for solid phase extraction and preconcentratiom of Fe(II), chromatographia, 70, 153-1545
Modise Rammika (2010) an ion imprinted polymers for the determination of Ni (II) ions from mine tailing sample a thasis. Rhodes University.
Paul preuss (1997) imprinted polymers woold selectively trap metal ions. Sience articles arcive Berkeley lab. Tersedia online: http://www.Lbl.gov/sciencearticles/Arcive/Imprintedpolymers.html.
Rao Tp. Kala R and Daniel S (2006) Metal ion-imprinted polymers-novel materialis for selective re-cognition of inorganic. Anal chim. Acla 578.105.116
Tuzen,Mustafa, et al. 2008. Determination of trace heavy metals in some textile products produced in turkey. Ethiopia. Chemical Society. 379-384
Downloads
Published
Issue
Section
Citation Check
License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).