Adsorptive Performance of Gelatin-Hematite Composite Synthesized from Iron Lathe Waste Using Guava Leaf Extract for Pb(II) Removal from Aqueous Solutions
DOI:
https://doi.org/10.15575/ak.v12i1.40817Keywords:
adsorption, adsorption kinetics, gelatin-hematite compositeAbstract
Hematite was successfully synthesized from iron lathe waste using guava leaf extract as a reducing agent. To enhance adsorption capacity, hematite was composited with gelatin, a polymer containing amide and carboxylate functional groups. The hematite-gelatin composite was employed as an adsorbent for Pb solutions. This study investigated the material's structure and the adsorbent's performance, including the composite's optimum dosage and contact time. Characterization techniques included XRD, FTIR, SEM-EDX, and AAS analyses. XRD analysis revealed that the hematite-gelatin composite exhibited a high degree of crystallinity. FTIR analysis of the guava leaf extract spectrum identified phenolic vibrational absorption with strong intensity at 3447 cm-1 (O-H stretching) and a weak C-H vibrational bond at 2928 cm-1. An ester group (C=O) at 1726 cm-1 indicated the presence of tannin compounds. For the hematite-gelatin composite, a C-O absorption band was observed at 1075 cm-1, along with Fe-O absorption bands at 430 and 519 cm-1. The SEM results show that the gelatin-hematite composite has a hollow and layered surface. The EDX analysis results show that the material contains C, N, O, Pb, and Fe, which indicates that gelatin has interacted with Pb when it becomes a composite and has absorbed Pb at a level of 1.4% after adsorption. Performance evaluation of the hematite-gelatin composite demonstrated high adsorption efficiency for Pb solutions. The adsorbent exhibited a high adsorption capacity of 800 mg/g with an optimal adsorbent dosage of 15 ppm and an optimal contact time of 70 minutes. The adsorption kinetics of the hematite-gelatin composite followed a pseudo-first-order adsorption model.
References
[1] M. W. Syafriliansah and T. Purnomo, “Kadar Logam Berat Timbal (Pb) Tumbuhan Aquatik dan Air Sebagai indikator kualitas Air Sungai Brangkal Mojokerto,” LenteraBio : Berkala Ilmiah Biologi, 11 (2), pp. 341–350, 2022, https://doi.org/10.26740/lenterabio.v11n2.p341-350
[2] Z. Sihang, W. Shuai, Y. Xiao, T. Shah, C. Chong, W. Xiang, S. Jianying, “Green sustainable and highly efficient hematite nanoparticles modified biochar-clay granular composite for Cr(VI) removal and related mechanism,” Journal of Cleaner Production, 276, 2020, https://doi.org/10.1016/j.jclepro.2020.123009
[3] A. H. A. Saad, A. M. Azzam, S. T. El-Wakeel, B. B. Mostafa, and M. B. Abd El-latif, “Industrial wastewater remediation using Hematite@Chitosan nanocomposite,” Egyptian Journal of Aquatic Biology & Fisheries, 24, (1), pp. 13–29, 2020, https://doi.org/10.21608/ejabf.2020.67580
[4] B. P. N. Gunawardhana et al., “Synthesis of Hematite Nanodiscs from Natural Laterites and Investigating Their Adsorption Capability of Removing Ni2+ and Cd2+ Ions from Aqueous Solutions,” Journal of Composites Science, 4, (2), 2020, https://doi.org/10.3390/jcs4020057
[5] M. E. Mahmoud, M. M. Saleh, M. M. Zaki, and G. M. Nabil, “A sustainable nanocomposite for removal of heavy metals from water based on crosslinked sodium alginate with iron oxide waste material from steel industry,” Journal of Environmental Chemical Engineering, 8 (4), 2020, https://doi.org/10.1016/j.jece.2020.104015
[6] L. M. Khoiroh, A. D. A. Sholekah, and E. Yulianti, “Structure and Morphology Properties of Nanoparticle Hematite Pigment from Lathe Waste,” International Journal of Chemistry, 13 (1), 2021, https://doi.org/10.5539/ijc.v13n1p21
[7] L. M. Khoiroh, M. N. Al-Chabib, and A. Prasetyo, “Synthesis and characterization of hematite (alpha-Fe2O3) from lathe waste using co-precipitation -calcination method,” IOP Conference Series: Materials Science and Engineering, 578 (1), 2019, https://doi.org/10.1088/1757-899X/578/1/012004
[8] A. Rufus, N. Sreeju, and D. Philip, “Size tunable biosynthesis and luminescence quenching of nanostructured hematite (alpha-Fe2O3) for catalytic degradation of organic pollutants,” Journal of Physics and Chemistry of Solids, 124, pp. 221–234, 2019, https://doi.org/10.1016/j.jpcs.2018.09.026
[9] Md. S. H. Bhuiyan, M. Y. Miah, S. C. Paul, T. Das Aka, O. Saha, Md. M. Rahaman, Md. J. I. Sharif, O. Habiba and Md. Ashaduzzaman, “Green synthesis of iron oxide nanoparticle using Carica papaya leaf extract: application for photocatalytic degradation of remazol yellow RR dye and antibacterial activity,” Heliyon, 6 (8), 2020, https://doi.org/10.1016/j.heliyon.2020.e04603
[10] R. R. Banala, V. B. Nagati, and P. R. Karnati, “Green synthesis and characterization of Carica papaya leaf extract coated silver nanoparticles through X-ray diffraction, electron microscopy and evaluation of bactericidal properties,” Saudi Journal of Biological Sciences, 22 (5), pp. 637–644, 2015, https://doi.org/10.1016/j.sjbs.2015.01.007
[11] C. M. Sangode, S. A. Mahant, P. C. Tidke, M. J. Umekar, and R. T. Lohiya, “Green synthesized of novel iron nanoparticles as promising antimicrobial agent: A review,” GSC Biological and Pharmaceutical Sciences, 15 (2), pp. 117–127, 2021, https://doi.org/10.30574/gscbps.2021.15.2.0130
[12] S. P. Patil and P. M. Rane, “Psidium guajava leaves assisted green synthesis of metallic nanoparticles: a review,” Beni-Suef University Journal of Basic and Applied Sciences, 9 (1), 2020, https://doi.org/10.1186/s43088-020-00088-2
[13] S. K. Biswal, G. K. Panigrahi, and S. K. Sahoo, “Green synthesis of Fe2O3-Ag nanocomposite using Psidium guajava leaf extract: An eco-friendly and recyclable adsorbent for remediation of Cr(VI) from aqueous media,” Biophysical Chemistry, 263, 2020, https://doi.org/10.1016/j.bpc.2020.106392
[14] S. D. Sornapudi and M. Srivastava, “Quantitative estimation of phytochemicals in different leaf extracts”, The Pharma Innovation Journal, 11 (9s), pp. 125-128, 2022, [online], https://www.thepharmajournal.com/special-issue?year=2022&vol=11&issue=9S&ArticleId=15270
[15] L. M. Khoiroh, D. A. Nisa, and R. F. A. Akbar, “The Structure of Hematite Pigment from Lathe Waste Using Guava Leave Extract by Hydrothermal Method,” IOP Conference Series: Earth and Environmental Science, 1439, 2025, https://doi.org/10.1088/1755-1315/1439/1/012006
[16] P. Xu, G. M. Zeng, D. L. Huang, C. L. Feng, S. Hu, M. H. Zhao, C. Lai, Z. Wei, C. Huang, G. X. Xie and Z. F. Liu, “Use of iron oxide nanomaterials in wastewater treatment: A review,” Science of The Total Environment, 424, 2012, https://doi.org/10.1016/j.scitotenv.2012.02.023
[17] M. Ulfa, D. Prasetyoko, H. Bahruji, and R. E. Nugraha, “Green Synthesis of Hexagonal Hematite (alpha-Fe2O3) Flakes Using Pluronic F127-Gelatin Template for Adsorption and Photodegradation of Ibuprofen,” Materials, 14 (22), 2021, https://doi.org/10.3390/ma14226779
[18] C. V. T. Rigueto, M. T. Nazari, L. Á. Massuda, B. E. P. Ostwald, J. S. Piccin, and A. Dettmer, “Production and environmental applications of gelatin-based composite adsorbents for contaminants removal: a review Environmental Chemistry Letters, 19 (3), pp. 2465–2486, 2021, https://doi.org/10.1007/s10311-021-01184-0
[19] D. Dimbo, M. Abewaa, E. Adino, A. Mengistu, T. Takele, A. Oro and M. Rangaraju, “Methylene blue adsorption from aqueous solution using activated carbon of spathodea campanulata,” Results in Engineering, 21, 2024, https://doi.org/10.1016/j.rineng.2024.101910
[20] N. Wang, J. Li, W. Lv, J. Feng, and W. Yan, “Synthesis of polyaniline/TiO2 composite with excellent adsorption performance on acid red G,” RSC Advances, 5 (27), pp. 21132–21141, 2015, https://doi.org/10.1039/C4RA16910G
[21] F. A. Shtewi, W. M. Barag and A. A. Tarroush, "Green Synthesis and Characterization of Iron Oxide Nanoparticles Using MenthaPiperita Leaves Extract," International Science and Technology Journal, 24, 2021, [online], https://www.stcrs.com.ly/istj/en/article-details.php?id=312
Downloads
Published
How to Cite
Issue
Section
Citation Check
License
Copyright (c) 2025 Lilik Miftahul Khoiroh

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).



